Programming While Entering Splits In Different Patterns - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

Programming while entering splits in different patterns

Multiple patterns are programmed splitting each pattern in sequence.
The following describes how to program 3 patterns in sequence.
Pattern 1
Pattern 2
Pattern 3
1. Carry out steps 1 to 3 in "Programming procedure"
(page 17).
2. Create the outline for pattern 1.
* Refer to "Pattern with lines" (page 52).
3. Touch .
4. Touch .
5. Touch to set a split.
58
6. Use the jog key to move the cursor
7. Press
8. Create the outline for pattern 2.
* Refer to "Pattern with lines" (page 52).
9. Carry out steps 3 to 5 once more.
10. Use the jog key to move the cursor
11. Press
12. Create the outline for pattern 3.
* Refer to "Pattern with lines" (page 52).
13. Carry out steps 5 and after in "Programming
procedure" (page 18).
BAS H series, Programmer
twice.
twice.
to B.
to C.