Siemens Sinumerik 840D Operating Turning page 280

Section 3
Notes
B523
B523
Tool list
Column header Meaning (continuation)
Drill rad. Drill radius for
(Holder angle and cutting edge angle are set by de-
fault settings)
Cutting edge angle Cuttting edge angle for turning tools
(refer to holder angle)
Loc. len Tip length for
The tip length is required for displaying the tools dur-
ing the simulation of the program processing.
Direction of spindle rotation
Coolant 1 and 2 can be switched off and switched on.
3.4 Icons in the toolbar and their meaning
Icons
Red X
Yellow triangle
pointing downward
Yellow triangle
pointing upward
Green frame
Magazine/location number:
Green double arrow
Gray double arrow
Red X
Page 16
Rotary drill type 560
Roughing tools type 500
Finishing tools type 510
Roughing tools type 500
Finishing tools type 510
Plunge cutter type 520
Turning tools and non-driven tools:
direction of the main spindle
Powered tools for milling and boring:
direction of the tool spindle
Meaning
The tool is disabled
The prewarning limit has been reached
The tool is in a special state
Place the cursor on the marked tool. A tool
tip will provide a brief description
The tool is preselected.
The magazine location is positioned at the
change position
The magazine location is positioned at the
loading position
The magazine location is disabled
840D/828D SINUMERIK Operate