Siemens Sinumerik 840D Operating Turning page 370

Section 2
Notes
B527
B527
Start-up
2.2 Vertical softkey bar
Display area Description
By pressing the VSK 3 "Change language" you can
adjust the user interface language to the language
of your choice.
By pressing the VSK 6 "Password" you can switch
to different protection levels of the control by using
different passwords.
Advanced functions can be activated by using a
higher leveled password.
2.3 Selecting the function "Change language"
2.4 Changing the user language
1. Press the "MENU SELECT"-key on the operator
panel.
The yellow horizontal softkey bar opens.
2. Press the HSK 6 "Start-up".
3 Press the VSK 3 "Change language"
The "Language selection" window opens.
4 Move the orange cursor over the language field of
your choice, by using the blue cursor keys.
Accept your selection by pressing the VSK 8 "OK"
or abort with pressing the VSK 7 "Cancel".
The Sinumerik changes the user interface language
to the language of your choice.
Tip:
You can change the user language of the interface directly at any time by
pressing the "CTRL" and "L" key on the keyboard simultaneously.
Page 4
By pressing the VSK 3 "Change language" the
"Language selection"-window opens.
840D/828D SINUMERIK Operate