Siemens Sinumerik 840D Operating Turning page 687

Complex programming example
Change back to the horizontal softkey-strip 1 by
pressing the key "Extension" on the operator panel.
The horizontal softkey-strip 1 opens.
Press the HSK 1.7 "Simulation" to start the simula-
tion of the program.
The control unit evaluates the simulation and opens
the simulation window.
In order to view the simulation as a front elevation of
the workpiece, press the VSK 1.4 "Face view".
840D/828D SINUMERIK Operate
Section 3
Notes