Siemens Sinumerik 840D Operating Turning page 463

Simple programming example
Description:
A simple turning machining is to be programmed as a G code program in
ShopTurn, using the programGUIDE.
Aim:
A new G code program is to be created and opened.
The G code lines and the turning cycle must be programmed and the pro-
gram is to be simulated.
For this, the data below are to be used:
Tool data: ROUGHING_TOOL_A80
Technology data: F 0.3 mm/rev
2.1 Creating a new programGUIDE program
A new G code program can be created from within the operating modes
"JOG, "MDA" and "AUTO" as follows:
1. Press the "Program Manager"-key on the keyboard.
The program manager will be opened directly.
- OR -
1. Press the "MENU SELECT"-key on the operator
panel.
Press the yellow HSK 1.4 "Program Manager".
The program manager window opens.
2. Select a drive where you want to create the program
("NC", "Local drive", "USB"), by pressing a horizontal
softkey.
3. Press the VSK 2 "New".
The vertical softkey bar with functions for creating
new programs opens.
4. Press the VSK 4 „programGUIDE G code" to open
the input mask for creating a new G code program.
Select "Main program MPF".
5. Enter a name for the program in the "Name" field,
e.g. "DIN_TURNING_1.MPF" and accept with press-
ing the VSK 8 "OK".
The editor window for entering G code commands
opens.
840D/828D SINUMERIK Operate
Section 2
Notes