Siemens Sinumerik 840D Operating Turning page 324

Section 9
Notes
B523
B523
Setting data
9.5 Spindle chuck data
The screen "Spindle chuck data" is prepared to define the dimensions of
the spindle on your machine.
9.4.1 Selecting the function "Spindle chuck data"
By pressing the VSK 4 "Spindle chuck data" the
"Spindles" window opens.
If you want to use the chuck of the main spindle as a reference point dur-
ing manual measuring, specify the chuck dimension ZC1.
(see module B520 section 6)
9.5.2 Editing spindle chuck data
1. Press the "MENU SELECT"-key on the operator
panel, then the HSK 2 "Parameter" to open the oper-
ating area "Parameter". Alternatively press the
"OFFSET"-key on the keyboard
2. Press the HSK 8 "Setting data" and press the VSK 4
"Spindle chuck data"
The "Spindle chuck data" window opens.
3. Place the cursor in the field ZC1and enter the new
values via the numeric keyboard.
Page 60 840D/828D SINUMERIK Operate