Siemens Sinumerik 840D Operating Turning page 561

Simulation
6.4 Details
With the function "Details" you can zoom in and zoom out of the blank.
6.4.1 Selecting the function "Details"
By pressing the VSK 1.6 "Details" the following func-
tions for changing the level of details are available in
a vertical softkey bar:
6.4.2 Vertical softkey bar
Display area Description
By pressing the VSK 1 "Autozoom" the workpiece
fills out the simulation window in an optimal way.
By pressing the VSK 2 "Zoom +" you zoom in into
the simulation window. Alternatively you can press
the "+"-key on the number block of the keyboard.
By pressing the VSK 3 "Zoom -" you can zoom out of
the simulation window. Alternatively you can press
the "-"-key on the keyboard.
By pressing the VSK 4 "Zoom" a frame opens in the
simulation window, that lets you zoom in to the exent
of the frame size.
Press the VSK1 "Zoom +" to increase and the VSK 2
"Zoom -" to decrease the frame size. Move the frame
with the blue cursor keys on the keyboard.
Press the VSK 8 "Accept" to zoom to the selected
extent or abort by pressing the VSK 7 "Cancel".
840D/828D SINUMERIK Operate
Section 6
Notes