Siemens Sinumerik 840D Operating Turning page 656

Section 2
Notes
B649
B649
Simple programming example
2.2 Programming example: Measuring
The following ShopTurn program with the call up of a measuring cycle is to
be programmed:
1. Create a new ShopTurn program like described in
the previous section 2.1.
Give the program a name, for example
„ST_MEASURE_TURNING_1.MPF".
The input window for the program header opens.
2. Insert the following values into the parameter mask:
Page 4 840D/828D SINUMERIK Operate