Siemens Sinumerik 840D Operating Turning page 425

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Insert a tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "CUTTER_D8" by using the blue cur-

sor key on the keyboard.

Press the VSK 1.1 "To program".

The G code command N130 T="CUTTER_D8"

Is inserted into the program.

Optionally you can program this line by hand..

Program now the following G code commands:

N150 SETMS(2)

N170 S4500 M3

Program the milling cycle (CYCLE79) for the multi-

edged spigot .

For this press the HSK 1.5 "Mill." to open the tech-

nology "Milling".

Press the VSK 3 "Multi-edge spigot".

Press the VSK 5 "Multi-edge".

The input mask for the milling cycle "Multi-edge"

Insert the following values into the parameter mask

for the multi-edge:

The following line for the CYCLE79 is inserted into te

N180 CYCLE79(100,0,1,-5,6,75,0,0,0,1,100,80,

2.5,0,0,500,0,1,1,2,,1,111)

840D/828D SINUMERIK Operate

Sinumerik 828d