Siemens Sinumerik 840D Operating Turning page 299

Magazine management
5.3 Parameters for "Magazine"
Parameter Meaning
Loc. Number of the magazine location:
(Only display, see section 3.3 "Tool list")
Type Tool type:
(See section 3.3 "Tool list")
Tool name Tool name:
(See section 3.3 "Tool list")
ST Sister tool:
(Only display, see section 3.3 "Tool list")
D Edge number:
(Only display, see section 3.3 "Tool list")
D Magazine location disabled
Z* Oversized tool:
Marking a tool as oversized. The tool occupies two
half locations left, two half locations right, one half lo-
cation top and one half location bottom in a magazine.
L Fixed location coding.
5.4 Sorting and filtering tools
When you are working with many tools, with large magazines or several
magazines, it is useful to display the tools sorted according to different cri-
teria. Then you will be able to find a specific tool more easily in the lists.
For sorting tools in the magazine see section 3.12 and 3.13 in this module.
840D/828D SINUMERIK Operate
Section 5
Notes