Siemens Sinumerik 840D Operating Turning page 417

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Program the following G code commands:

N210 REPEATB HOLE

N240 G0 X200 Z150

Insert the tool "TAP_M10" into the program (see

step 5) or program the following line by hand:

N250 T="TAP_M10"

Program the following G code commands:

N290 G0 X0 Z100

Finally program the cycle for the thread drilling

For this, press the HSK 1.2 "Drill.", to open the tech-

nology "Drilling".

Press the VSK 6 "Thread".

If not active by default, press the VSK 3 "Tapping" to

open the input mask for the CYCLE84 "Tapping".

Insert the values into the parameter mask like dis-

played below:

Accept your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N300 MCALL CYCLE84(100,0,1,,15,0,5,,1.5,0,

60,60,0,1,0,0,5,1.4,,,,,1001,2001001)

840D/828D SINUMERIK Operate

Sinumerik 828d