Siemens Sinumerik 840D Operating Turning page 665

Complex programming example
12. Position the tool with rapid traverse in Z direction.
Press the VSK 2 "Straight".
The input window for the technology "Straight"
opens.
13. Insert the following position values into the parame-
ter mask, and press the VSK 5 "Rapid traverse" to
set the feed rate to rapid traverse:
Confirm your inputs by pressing the VSK 8 "OK".
The following program block is inserted into the work
plan window.
14. Insert now a CYCLE994 for measuring the barrel of
the cylindrical workpiece into the program.
Press the HSK 2.6 "Measurem. turning".
The work area "Measurement turning" with extended
measuring functions opens.
Press the VSK 4 "Workpiece measure".
The vertical softkey bar with functions for the meas-
urement of workpieces opens.
Press the VSK 2 "Two-point measurem.".
The input window for the CYCLE994 opens.
15. Insert the following values into the parameter win-
dow:
840D/828D SINUMERIK Operate
Section 3
Notes