Siemens Sinumerik 840D Operating Turning page 658

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Insert the following position values into the parame-

ter mask, and press the VSK 5 "Rapid traverse" to

set the feed rate to rapid traverse:

Confirm your inputs by pressing the VSK 8 "Accept".

The following program block is inserted into the work

Program now the measuring cycle (CYCLE974) "

One-pt. meas./CYCLE974".

Press the HSK 2.6 "Measurem. turning".

The work area "Measurement turning" with extended

measuring functions opens.

Press the VSK 4 "Workpiece measure".

The vertical softkey bar with functions for the meas-

urement of workpieces opens.

Press the VSK 2 "One-point measurem.".

The input window for the CYCLE974 opens.

Insert the following values into the parameter win-

840D/828D SINUMERIK Operate

Sinumerik 828d