Siemens Sinumerik 840D Operating Turning page 405

NC Execute
The function "NC Execute" lets you load the active program from the pro-
gram editor to the operating area "Machine" in the operating mode "AUTO"
ready for machining.
7.1 Selecting the function "NC Execute"
By pressing the HSK 1.8 "NC Execute" the control,
switches to the operating area "Machine" under the
operating mode "AUTO".
The program is loaded into the internal memory of
the NC and is now ready for machining (see picture
below).
840D/828D SINUMERIK Operate
Section 7
Notes