Siemens Sinumerik 840D Operating Turning page 664

Section 3
Notes
B649
B649
Complex programming example
8. Insert the following values into the parameter win-
dow:
9. Confirm your inputs by pressing the VSK 8 "OK".
The following two program blocks are inserted into
the work plan window.
10. After the first measurement, position the tool with
rapid traverse in X direction.
Press the VSK 2 "Straight".
The input window for the technology "Straight"
opens.
11. Insert the following position values into the parame-
ter mask, and press the VSK 5 "Rapid traverse" to
set the feed rate to rapid traverse:
Confirm your inputs by pressing the VSK 8 "OK".
The following two program blocks are inserted into
the work plan window.
Page 12 840D/828D SINUMERIK Operate