Siemens Sinumerik 840D Operating Turning page 536

Section 5
Notes
B601
B601
Various
Parameter Meaning
Do not drag zero
No
point.
Work offset
Work offset in which
Base ref.
the coordinate sys-
G54
tem displaced by Z1
must be saved.
G55
G56
G57
Z1 (mm) Transfer position (abs)
F (mm/min) Feed
5.4.6 Parameters for counterspindle "Rear"
Parameter Meaning
Rear:
Work offset.
Work offset in which
Base ref.
the coordinate sys-
G54
tem, which was
shifted according to
G55
ZW and by ZV as well
G56
as mirrored in Z, must
be saved.
G57
ZnW (mm)
Machining position for
special axis (abs.);
MCS
ZV (mm) Workpiece zero offset
in Z direction (inc, the
sign is also evalu-
ated).
Page 28
Help picture/animation
(continuation)
Help picture/animation
(see section 5.4.2)
(see section 5.4.2)
840D/828D SINUMERIK Operate