Siemens Sinumerik 840D Operating Turning page 310

Hide thumbs Also See for Sinumerik 840D:

7.7 Details of the work offset

For each work offset, you can display and edit all data for all axes.

You can also delete work offsets.

For every axis, values for the following data will be displayed:

Coarse and fine offsets

Settings for rotation, scaling and mirroring are specified here and can only

be changed here.

7.7.1 Selecting the function "Work offset - details:"

By pressing the VSK 7 "Details" a different work off-

set window opens, depending on the work offset

(Active, Base, G54...G57) selected before:

7.7.2 Displaying details of the work offset

Press the "MENU SELECT"-key on the operator

panel and the HSK 2 "Parameter" to open the oper-

ating area "Parameter". Alternatively press the

"OFFSET"-key on the keyboard.

Press the HSK 5 "Work offset".

"Work offset - details: Rotary table ref./Basic ref-

erence/Total basic WO/G54 - G55/Tool reference/

Workpiece ref./Programmed WO/Cycle reference/

"Work offset - details: 1. chan.-sp. Basic WO"

"Work offset - details: G54 - G57"

840D/828D SINUMERIK Operate

Sinumerik 828d