Siemens Sinumerik 840D Operating Turning page 680

Section 3
Notes
B657
B657
Complex programming example
2. Enter the following values for the program header
and
Acknowledge the inputs with the VSK 8 "Accept".
the following program block is added to the work
schedule:
Add a measuring probe (3D_PROBE) to the pro-
3.
gram.
For this select the measuring probe from the tool list
via the technology "Straight Circle" !
Hint:
his is necessary, because the tool list cannot be se-
lected directly by means of the technology
"Measurement milling".
In order to get to the function "Straight Circle", ex-
pand the horizontal softkey-strip 1 by pressing the
key "Extension" on the operator panel.
The horizontal softkey-strip 2 opens.
Press the HSK 2.2 "Strght Circle" to gain access to
the function "Tool".
Press the VSK 1 "Tool" to open the parameter win-
dow for the tool.
Page 12 840D/828D SINUMERIK Operate