Toro Reelmaster 5010-H Diagnostic Manual page 37

2. Loosen the socket-head screw that secures seat harness connector P75 to the TEC-5002 and unplug the
connector (Figure
1. Main harness connector P75
3. Use a multimeter to test the resistance between the following pairs of locations:
Location Harness
1 Seat
2 Seat
1 Main
2
1 Main
2
4. Repair or replace worn or damaged parts as required.
5. Go to Returning the Machine to Service (page 22)
21).
Connector
P75
P75
P16
Chassis ground
P16
Chassis ground
Figure 21
2. Socket-head screw
Wire Expected
Pin
Color Reading
Black
30
(Ground)
Less than
2 ohms
Gray/
37
Brown
Gray/
A
Brown
More than
1000 ohms
Brown/
B
Yellow
Less than
2 ohms
and follow the steps listed.
37
Connector Graphic
g036006