Station Features; Account Code Button; Add-On Module (Dadm); Alert Signal Button - Toshiba Strata DK14 General Description Manual

Features

Station Features

Station Features
This chapter describes the features that are available to Strata DK station users. For an overview,
see "Station Features by Station Type"
peripheral capacities and station features.
Note Not all features for digital telephones are available on the digital cordless phones.

Account Code Button

This button, enables digital telephone users to enter Voluntary Account Codes (verified or
nonverified), during conversations without interrupting the talk path. It can also be used to enter
Verified Account Codes to allow normally restricted stations to dial long distance calls.

Add-on Module (DADM)

One to two DADMs can be attached to a DKT2000-series digital telephone to provide an
additional 20 or 40 buttons (see
can be programmed for outside line access, System or Personal Speed Dial, or Direct Station
Selection

Alert Signal Button

This feature enables a digital or electronic telephone user to signal a predesignated station. When
$OHUW 6LJQDO
the
signal can be used to alert someone about a pre-arranged event or action—No talk path will exist
between the called and calling telephones.
An alert signal can be sent to telephones that are idle, or Busy, Call Forward, and/or Do Not
Disturb mode. Each station that has this feature can send/receive the alert signal to/from the other
station in the alerting pair. Up to four unique

Automatic Busy Redial (ABR)

Digital and electronic telephone users who dial a busy outside telephone number can set ABR,
which automatically redials the number at preprogrammed intervals. Busy tone must consist of
standard tones. The system will call back the station when it rings the number. ABR is compatible
with LCR and ISDN, but is not compatible with outgoing DID or Tie line calls. ABR requires the
QRCU3 on DK14 and K5RCU option PCB for the DK40i; it is standard on the DK424.

Automatic Callback (ACB)

Station users that call busy or Do Not Disturb (DND) stations can set ACB and have the system
call them back when the busy or DND station or trunk group becomes available. When calling a
station with multiple [PDNs] in the ring first mode, ACB will be available to the calling station
only if all the [PDNs] of the called station are busy.

Automatic Hold

This option enables a user to place a CO
or [DN] button. The user can then alternate between the new and the old call by pressing the
/LQH
desired
another line and switching between calls.
90
"Digital Add-on Module (DADM)" on Page
(Appendix – Table 42 on Page
button is pressed, a distinct tone signal is sent to the dedicated station. This
or [DN]. If this feature is not activated, users must press
on Page 100. Tables 34 and
115).
$OHUW 6LJQDO
buttons can be on a station.
/LQH
or [DN] call on Hold by pressing another CO
35 list the station and
53). DADM buttons
+ROG
before accessing
Strata DK General Description
/LQH
5/99