Automatic Busy Redial (Abr) - Toshiba Strata DK14 General Description Manual

Automatic Busy Redial (ABR)

ABR enables a station user to automatically redial a busy outside number up to 15 times at pre-
programmed intervals. Call attempts can be programmed for 30- or 60-second intervals. ABR is
not attempted if the calling station is busy with another call, but the pre-programmed timer
continues to run.
When the redial is successful, the calling station receives ABR ringback tone for 40 seconds or
until the call is answered.
This feature can be enabled or denied on a station-by-station basis. It can be accessed by using a
feature code, or it can be programmed as a feature button.
Important! This feature is not available on outgoing Tie or DID lines.
Automatic Busy Redial is completely compatible with Least Cost Routing functions.
Benefits
Saves time and money because the station user does not waste time looking up numbers. The
system redials the number accurately, eliminating costly dialing errors, especially on long
telephone numbers. Business can be completed efficiently, because the system automatically tries
the number again, while the user continues to work.
Since the feature can be assigned on a station-by-station basis, a company can assign it only to
those who require it. This way, CO lines are not be tied up with an excessive amount of redials.
Automatic Busy Redial can cut costs because it only redials a call on the CO line originally
selected by the Least Cost Routing feature.
Strata DK Feature Description 5/99
System Availability
Standard on Strata DK14/DK40i/DK424
Requirements
Strata DK14/40i - DKT or EKT with busy
tone detectors
Features
Station Features
121