Flash - NEC SL2100 Features And Specifications Manual

SL2100
Description
Flash allows an extension user to access certain CO and PBX features by interrupting the trunk loop
current. Flash lets an extension user take full advantage of whatever features the connected Telco or
PBX offers. You must set the Flash parameters for compatibility with the connected Telco or PBX.
Conditions
F
The system does not provide a ground flash.
Default Settings
Enabled
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Drop Key
PBX Compatibility/Behind PBX
InMail
Guide to Feature Programming
Program
No.
11-12-42 Service Code Setup (for Service Access) - Flash
on Trunk lines
14-02-03 Analog Trunk Data Setup - Flash Type
14-02-04 Analog Trunk Data Setup - Hooking Type
14-04-01 Behind PBX Setup - Type of Connection
1-306
Program Name Input Data
0~9, , # Maximum of 8 digit
*
0 = Open Loop Flash
1 = Ground
0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
3 = CTX assume 9
ISSUE 1.0

Flash

Default
#3
0
0
0
Flash