NEC SL2100 Features And Specifications Manual page 166

SL2100
System Availability
Terminals
All Multiline Terminals with a display and Single Line Terminals equipped to receive Caller ID
Required Component(s)
3COIDB-C1
2BRIDB-C1
1PRIDB-C1
C
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Call Arrival (CAR) Keys
Caller ID Call Return
Conference, Voice Call/Privacy Release
Park
Station Message Detail Recording
InMail
System Caller Log
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
20-09-02 * Class of Service Options (Incoming Call Service)
- Caller ID Display
14-02-10 * Analog Trunk Data Setup - Caller ID
15-03-09 Single Line Telephone Basic Data Setup - Caller
ID Function
1-152
Program Name Input Data
0 = Off (Caller ID not displayed.)
1 = On (Caller ID is displayed.)
0 = Off (Caller ID not displayed.)
1 = On ( Caller ID is displayed.)
0 = Disable (Caller ID not dis-
played.)
1 = Enable (Caller ID is dis-
played.)
ISSUE 1.0
Default
COS 01 ~ 15 = 1
1
1
Caller ID