NEC SL2100 Features And Specifications Manual page 422

SL2100
Program
No.
16-01-01 Department Group Basic Data Setup - Depart-
ment Name
16-01-02 Department Group Basic Data Setup - Depart-
ment Calling Cycle
16-01-04 Department Group Basic Data Setup - Hunting
Mode
16-01-10 Department Group Basic Data Setup - Enhanced
Hunt Type
I
16-02-01 * Department Group Assignment for Extensions
16-02-02 Department Group Priority Assignment
45-01-01 * Voice Mail Integration Options - Voice Mail De-
partment Group Number
14-01-22 Basic Trunk Data Setup - Caller ID to Voice Mail
15-02-37 Multiline Telephone Basic Data Setup - Voice
Mail Message Wait Lamp Color
15-07-01 Programmable Function Keys
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
20-09-02 Class of Service Options (Incoming Call Service)
- Caller ID Display
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
47-11-01 InMail Answer Table Options - Answer Schedule
Override
47-11-02 InMail Answer Table Options - Override Mailbox
Number
47-11-03 InMail Answer Table Options - Default Mailbox
Number
47-11-04 InMail Answer Table Options - Next Answer Ta-
ble
1-408
Program Name Input Data
Maximum 12 characters
0 = Normal Routing (Priority)
1 = Easy - UCD Routing (Circu-
lar)
0 = Stop at last member (non-
loop)
1 = Circular
0 = No hunting
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No
Answer
Department Group = 1 ~ 50
Priority Order = 1 ~ 200
1 ~ 200
0 = No Voice Mail Assigned
1 ~ 50 = Department Group 1 ~
50
0 = Disable (Caller ID not sent to
VM.)
1 = Enable (Caller ID is sent to
VM.)
0 = Green
1 = Red
-
0 = Disable (Off)
1 = Enable (On)
0 = Off
1 = On
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0 = No (Disabled)
1 = Yes (Enabled)
-
-
Answer Table (1 ~ 16)
0 = Undefined
ISSUE 1.0
Default
No Setting
0
0
0
(Refer to the program-
ming manual for the
default values of all ex-
tensions.)
(Refer to the program-
ming manual for the
default values of all ex-
tensions.)
0
1
1
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
1
COS 01 ~ 15 = 1
0
0
Refer to Programming
Manual.
Refer to Programming
Manual.
0
InMail