NEC SL2100 Features And Specifications Manual page 385

ISSUE 1.0
To set a room as checked out:
Set a room as checked out after your guest checks out and the room is clean. You can set a room as
checked out only if you have previously dialed 638 to check it in.
1. Lift the handset.
2. Dial 639.
3. Dial the extension number of the room you want to check out.
You hear confirmation tone.
4. Hang up.
In the STATUS mode, the DSS Console key for the room is off.
House Cleaning Options
To set a room house cleaning status from the room telephone:
Your cleaning staff can set the room status.
1. Lift the handset.
2. Dial 640.
3. Dial the room status code:
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of Order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
= Reserve 5
*
# = Reserve 6
You hear confirmation tone.
4. Hang up.
In the STATUS mode, the DSS Console shows the room status: Slow Flash for Maid Required; Fast
Flash for Inspect Room. (Digital (2W) DSS Console)
To set room status from another telephone:
The supervisor's station should be the only telephone with this ability.
1. Lift the handset.
2. Dial 641.
3. Dial the extension number of the room you want to set.
Features and Specifications Manual
SL2100
H
1-371