NEC SL2100 Features And Specifications Manual page 759

ISSUE 1.0
Virtual Extensions
Guide to Feature Programming
Program Program Name
No.
11-04-01 Virtual Extension Numbering - Extension Num-
ber
15-01-01 Basic Extension Data Setup - Extension Name
15-02-07 Multiline Telephone Basic Data Setup - Automat-
ic Hold for CO Lines
15-02-21 Multiline Telephone Basic Setup - Virtual Exten-
sion Access Mode (when idle Virtual Extension
key pressed)
15-02-30 Multiline Telephone Basic Data Setup - Toll Re-
striction Class
15-07-01 Programmable Function Keys
15-08-01 Incoming Virtual Extension Ring Tone Setup - In-
coming Ring Pattern
15-09-01 Virtual Extension Ring Assignment - Ringing
15-10-01 Incoming Virtual Extension Ring Tone Order Set-
up
15-11-01 Virtual Extension Delayed Ring Assignment -
Ringing
15-18-01 Virtual Extension Key Enhanced Options - Virtu-
al Extension Key Operation Mode
Features and Specifications Manual
Input Data
Dial (Up to 8 digits)
Up to 12 Characters
0 = Hold
1 = Disconnect (Cut)
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
0 = Virtual Extension (Follows
virtual extension Toll Class in
PRG 21-04.)
1 = Real Extension (Follows
physical stations Toll Class in
PRG 21-04.)
-
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
0 = No Ringing
1 = Ring
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
0 = Immediate Ring
1 = Delayed Ring
0 = Release
1 = Land on the key
SL2100
Default
All Virtual Extension
Port = No Setting
No Setting
1
2
1
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
0
0
Priority order:
1 = 0 (Tone Pattern 1)
2 = 1 (Tone Pattern 2)
3 = 2 (Tone Pattern 3)
4 = 3 (Tone Pattern 4)
0
0
1-745
S