NEC SL2100 Features And Specifications Manual page 684

SL2100
Program
No.
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook
Ringing
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
O
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
20-13-05 Class of Service Options (Supplementary Serv-
ice) - Intercom Off-Hook Signaling
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
20-13-34 Class of Service Options (Supplementary Serv-
ice) - Block Manual Off-Hook Signaling
20-18-06 Service Tone Timers - Interval of Call Waiting
Tone
80-01-01 Service Tone Setup - Tone 39, Special Audible
Ring Busy Tone
80-01-02 Service Tone Setup - Tone 39, Special Audible
Ring Busy Tone
Operation
To send Off-Hook signals to an extension busy on a call:
Your extension may send off-hook signals automatically.
1. Dial service code.
- OR -
Press the Off-Hook Signaling key (PRG 15-07 or SC751: 33).
You hear ringback.
To have your call voice-announce, dial 1.
Receiving Off-Hook Signaling on a Single Line Terminal while engaged on an internal
or external call:
1. When Off-Hook Signaling is heard in the receiver, press Flash key to answer the call. The first call
is placed on hold.
1-670
Program Name Input Data
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker and Handset Beep
-
1 ~ 15
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
0 = Off (ICM off hook signaling
disabled.)
1 = On (ICM off hook signaling
enabled.)
0 = Off (manually)
1 = On (automatically)
0 = Off
1 = On
1 ~ 64800 seconds
0 ~ 255 (0 = Endless)
0 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
ISSUE 1.0
Default
5
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
10
Refer to Programming
Manual.
Refer to Programming
Manual.
Off-Hook Signaling