NEC SL2100 Features And Specifications Manual page 285

ISSUE 1.0
• Programmable Function Keys for ACD codes (
cannot be programmed on a DSS Console.
• Programmable Function keys for Trunk Group (
programmed on a DSS Console as the system does not allow entry of the additional data required
for these keys.
• A user can use the One-Touch Programmable Function Key (code 01) to have DSS Console keys
for Personal Speed Dial and common and group Speed Dial.
• Lighting status for agents and non- agents does not appear on the same console type. For agent's
lighting status, a DSS Console must be programmed as a console in Program 30-01-01. For non-
agents, the console must be programmed as a business console.
• A DSS key indicates only a Call Forwarding indication for extensions forwarded with Immediate Call
Forwarding.
• A DSS Console can have line keys for placing and answering calls.
• The DSS Console provides one-touch calling and a Busy Lamp Field for Door Boxes. Refer to
Box on page 1-291 when programming Door Boxes.
• The DSS Console provides one-touch Night Service switching. Refer to
page 1-661 when programming Night Service options.
• Like a One-Touch Key, a user can have DSS Console keys for Direct Station Selection, Trunk
Calling, Personal Speed Dial, Speed Dialing, and Service Code access.
• The DSS Console provides one-touch External and Internal Page zone access. Refer to
External on page 1-677
• You can program the DSS Console keys with service codes to provide the functions of many of the
Programmable Function keys. The stored service code can have up to three digits, but it can have
additional option codes added (e.g. to set Immediate Call Forward for all calls. Trunk Group (
and Virtual Extension (
*
not allow entry of the additional data required.
• The capacity of a console can be expanded by assigning a Page key (shift key). The Page key (shift
key) must be assigned on keys 55~60.
• The expanded capacity for DSS Consoles (two pages), is not supported for DSS Consoles in the
Monitor Mode.
• When a Multiline Terminal user is on a call, they can transfer to another station by pressing a DSS
key for that station. It is not necessary to press Transfer key to transfer to another station using a
DSS key.
When a Multiline Terminal user is on a call, they must press Transfer key to transfer a call off site with a
DSS key.
• Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered as P in
the dial string and causes the system to wait three seconds before sending the rest of the digits that
follow the P (pause). Multiple pauses can be entered.
• The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to ISDN
and Intercom calls. When using the @, the system waits for the destination to answer (answer
supervision), and then sends the rest of the digits.
• Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom calls, or
after the @ for ISDN calls.
Default Settings
• No DSS Consoles assigned (in PRG 30-02-01).
• All DSS Console key ranges are ports 1~60.
• Once a DSS Console is enabled, the console keys are DSS keys (PRG 30-03-01).
Features and Specifications Manual
10,
*
02) and Virtual Extension (
*
and Paging, Internal on page
03) codes can not be programmed on a DSS Console as the system does
12, 13, 14, 15, 16,
* * * * *
03) cannot be
*
Night Service on
1-683.
SL2100
17, 18, 19)
* * *
Door
Paging,
02)
*
1-271
D