Table 1-72 Error Messages And Causes - NEC SL2100 Features And Specifications Manual

ISSUE 1.0
Guide to Feature Programming
Program Program Name
No.
90-02-01 Programming Password Setup - User Name
90-02-02 Programming Password Setup - Password
90-02-03 Programming Password Setup - User Level
Troubleshooting
The table below shows possible Error messages and Causes:
Error Message
Mailbox XXX does not exist.
(XXX = mailbox number)
The mailbox is being used by another session
There is no available space in the SD.
The file is being used by another session. Please try
again later.
The selected file has already been deleted.
The file is being used by another session. Please try
again later.
The selected file has already been deleted.
Cannot upload the file since the original file is being
used by another session. Please try again later.
Operation
Changing VRS Messages using User Admin Mode (UA)
Audio files up to 2MB may be uploaded to the SL2100 for VRS messages. All 100 VRS messages can
be uploaded or deleted. The messages can be used on all VRS features: General Message,
Automated Attendant greetings, ACD messages and the 900 Preamble.
In order for uploaded messages to play they must be in the proper format. Audio files not recorded in
the proper format may not playback. The proper format is:
Bit Rate
Sampling Size
Channel
Features and Specifications Manual
Maximum 10 characters
Up to eight digits
0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator
Level 1)
4 = SB (System Administrator
Level 2)
5 = UA (User Programming Ad-
minister Mode Level 1)

Table 1-72 Error Messages and Causes

The mailbox does not exist
When the mailbox is being used by another session, either PC or tel-
ephone.
When there is no available space in the SD.
When the file to be downloaded is being used by another session, ei-
ther PC or telephone.
When the file selected for download has already been deleted.
When the file selected for deletion is being used by another session.
When the file selected for deletion has already been deleted.
When the file to be replaced is being used when trying to upload the
replacement.
64kbps
8 bits
1 (Mono)
Input Data
Refer to the Program-
ming Manual for the
default values.
Refer to the Program-
ming Manual for the
default values.
Refer to the Program-
ming Manual for the
default values.
Cause
SL2100
Default
V
1-923