NEC SL2100 Features And Specifications Manual page 306

SL2100
Required Component(s)
082U-B1
Related Features
ISDN Compatibility
Paging, External
Single Line Terminals
D
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
10-03-05 * ETU Setup - ETU Setup (LTA/LCA) - 1: Door
Phone
32-02-01 * Door Box Ring Assignment - Extension Number
32-03-01 Door Box Basic Setup - Chime Pattern
32-04-01 Door Box Name Setup - Door Box Name
10-61-01 Relay Port Setup - Relay Port 1 (Relay Type)
10-61-02 Relay Port Setup - Destination Selection 1
10-61-03 Relay Port Setup - Relay Port 2 (Relay Type)
1-292
Program Name Input Data
0 = SLT
1 = Door Phone
Maximum eight digits
0 = None
1 = Door Box Ring 1
2 = Door Box Ring 2
3 = Door Box Ring 3
4 = Door Box Ring 4
5 = Door Box Ring 5
6 = Door Box Ring 6
Up to 12 characters
0 = No Setting
1 = External MOH
2 = BGM resource
3 = External Speaker
4 = Door Phone
[In case 10-61-01 is 1 or 2] = Not
Use
[In case 10-61-01 is 3] = 1-3 Ex-
ternal Speaker message No
[In case 10-61-01 is 4] = 1-6
Door Phone No
0 = No Setting
1 = External MOH
2 = BGM resource
3 = External Speaker
4 = Door Phone
ISSUE 1.0
Default
0
Door Box Ringing
Member 1 = 101
Other : No Setting
Door Box 1 = 1
Door Box 2 = 2
Door Box 3 = 3
Door Box 4 = 4
Door Box 5 = 5
Door Box 6 = 6
Door Box Name 1 =
DOOR-1
Door Box Name 2 =
DOOR-2
:
Door Box Name 6 =
DOOR-6
0
0 (Not Used)
0
Door Box