NEC SL2100 Features And Specifications Manual page 32

SL2100
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
35-05-01 * Account Code Setup - Account Code Mode
A
35-05-02 Account Code Setup - Forced Account Code Toll
Call Setup
35-05-03 Account Code Setup - Account Codes for Incom-
ing Calls
35-05-04 Account Code Setup - Hiding Account Codes
35-06-01 Verified Account Code Table - Verified Account
Code
40-10-01 Voice Announcement Service Option - VRS
Fixed Message
15-07-01 Programmable Function Keys
21-01-14 System Options for Outgoing Calls - Forced Ac-
count Code Inter-digit Timer
14-01-11 Basic Trunk Data Setup - Account Code Re-
quired
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-13-20 Class of Service Options (Supplementary Serv-
ice) - Account Code/Toll Restriction Operator
Alert (Restricted Operation Transfer)
21-04-01 Toll Restriction Class for Extensions - Restric-
tion Class
21-24-01 Forced Access Dial Data - Dialing Number
1-18
Program Name Input Data
0 = Account Codes Disabled
1 = Account Codes Optional
(This is for the account code en-
try feature.)
2 = Account Code Required Not
Verified (Forced Account Codes
enabled, no verification with the
system required)
3 = Account Code Required and
Verified (Forced Account Codes
enabled, verification with PRG
35-06-01 required)
0 = Account Codes for ALL calls
1 = Account Codes for TOLL
calls
0 = Disabled (User cannot enter
an account code.)
1 = Enabled (User can enter an
account code while on an incom-
ing call.)
0 = Account Codes displayed
1 = Account Codes not displayed
1 ~ 9, 0, #, @ (@ = Wild card)
(Up to 16 digits)
0 = Disable (VRS fixed message
will not be played.)
1 = Enable (VRS fixed message
will be played.)
50 = Account Code
0 ~ 64800 seconds
0 = Disabled (user cannot enter
account codes using this trunk.)
1 = Enabled (user can enter ac-
count codes using this trunk.)
1 ~ 15
0 = Off (Call restricted.)
1 = On (Call routed to operator.)
1 ~ 15 = Toll Class 1 ~ 15
1 ~ 0, , #
*
(maximum 16 digits)
Account Code Forced/Verified/Unverified
ISSUE 1.0
Default
0
0
0
0
No Setting
0
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
3
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 0
2
000