NEC SL2100 Features And Specifications Manual page 269

ISSUE 1.0
Program Program Name
No.
22-01-07 System Options for Incoming Calls - DID Incom-
ing Ring Group No Answer Time
22-11-08 DID Translation Table - Maximum Number of DID
Calls
22-11-09 DID Translation Table - Music on Hold Source
DDI Mode Switching
Program Program Name
No.
22-02-01 * Incoming Call Trunk Setup - Trunk Service Type
14-05-01 Trunk Group - Trunk Group Number
22-09-01 DID Basic Data Setup - Dial-In Receive digit
22-17-01 * Dial-In Conversion Table Area Setup for Time
Pattern - Received Dial
22-17-04 * Dial-In Conversion Table Area Setup for Time
Pattern - Dial-In Conversion Table Number
22-11-01 DID Translation Table - Received Number
22-11-02 * DID Translation Table - Target Number
20-07-26 * Class of Service Options (Administrator Level) -
Dial-In Mode Switch
15-07-01 Programmable Function Keys
Direct Call by Time Schedule:
Program Program Name
No.
11-10-35 Service Code Setup (for System Administrator) -
Dial-In Mode Switching
Features and Specifications Manual
Input Data
0 ~ 64800 seconds
0 ~ 128 (0 = No limit)
0 = No Limit (Can receive as
many calls as you have available
trunks.)
0 = IC/MOH Port
1 = BGM Port
Input Data
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
1 ~ 128 = Trunk Port
0 ~ 50 = Group Number
1 ~ 128 = Priority
1 ~ 8
Up to eight digits
1 ~ 1000 (These are the table
entries in PRG 22-11.)
Maximum eight digits
(0 ~ 9, , #, @)
*
Maximum 36 digits
(0 ~ 9, * , #, @)
0 = Off (Station cannot control
DDI switching.)
1 = On (Station can control DDI
switching.)
88 = Dial In Mode Switching
Input Data
0~9, , # Maximum of 8 digit
*
SL2100
Default
20
0
0
Default
0
1
2
No Setting
0
Refer to the Program-
ming Manual.
Refer to the Program-
ming Manual.
COS1 ~ 14/COS15 = 1
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Default
609
1-255
D