Trunk Groups - NEC SL2100 Features And Specifications Manual

Hide thumbs Also See for SL2100:

Table of Contents

Trunk Groups let you optimize trunk usage for incoming and outgoing calls. Each group can be

accessed by an Access Code plus the group number. There are 50 available Trunk Groups and you

set the access order in trunk group programming.

• Unless a user preselects a trunk, Trunk Group programming selects the trunk Speed Dialing used

for trunk calls.

• If a user dials a number that is not programmed in ARS, the system can route the call to a trunk

• All DID trunks of the same type should be placed in the same trunk group. These trunk groups must

then be assigned to a DID Translation Table.

• Trunks ring extensions according to Ring Group programming.

Default Settings

All trunks are in group 1.

System Availability

All Stations

Required Component(s)

Related Features

Abbreviated Dialing/Speed Dial

Automatic Route Selection (ARS/F-Route)

Central Office Calls, Placing

Dial Tone Detection

Direct Inward Dialing (DID)

Programmable Function Keys

Trunk Group Routing

Trunk Groups

Show Quick Links

Table of Contents