NEC SL2100 Features And Specifications Manual page 617

ISSUE 1.0
Guide to Feature Programming
Program Program Name
No.
11-12-21 Service Code Setup (for Service Access) - Meet-
Me Answer to Specified Internal Paging Group
11-12-22 Service Code Setup (for Service Access) - Meet-
Me Answer to External Paging
11-12-23 Service Code Setup (for Service Access) - Meet-
Me Answer in Same Paging Group
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-10-06 Class of Service Options (Answer Service) -
Meet-Me Conference and Paging
31-02-01 Internal Paging Group Assignment - Internal
Paging Group Number
31-02-02 Internal Paging Group Assignment - Internal All
Call Paging Receiving
For additional programming information on Paging, refer to
Internal on page 1-683
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial Paging code [External 703, or Combined (
3. Announce the zone.
- OR -
1. At the Multiline Terminal, press the External Paging Zone key (PRG 15-07-01 or SC 751: 19 +
zone).
2. Announce the zone.
To join a Meet Me External Page:
1. At the Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 765.
3. Dial the announced External Paging Zone (1~3).
You connect to the other party.
Features and Specifications Manual
features.
Input Data
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
-
1 ~ 15
0 = Off
1 = On
0 ~ 50
(0 = No setting)
0 = Off
1 = On
Paging, External on page 1-677
1)] and the Paging Zone.
*
SL2100
Default
764
765
763
Refer to the program-
ming manual for the
default values and for
M
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
All stations = 1
1
and Paging,
1-603