NEC SL2100 Features And Specifications Manual page 21

ISSUE 1.0
Additional Data for Station Speed Dial
Program Program Name
No.
13-01-02 Speed Dialing Function Setup - Station Speed
Dial
15-02-60 Multiline Telephone Basic Data Setup - Soft Key/
Navigation key Mode
13-06-01 * Station Speed Dial Number and Name - Speed
Dialing Data
13-06-01 * Station Speed Dial Number and Name - Speed
Dialing Name
15-14-01 One-Touch Keys - Dial Data
15-14-02 One-Touch Keys - Name
11-11-39 Service Code Setup (for Setup/Entry Operation) -
One Touch Dial Entry
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
13-04-03 Speed Dialing Number and Name - Transfer
Mode
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
13-04-05 Speed Dialing Number and Name - Incoming
Ring Pattern
Features and Specifications Manual
Input Data
0 = Do not use
1 = Use
0 = Standard Mode
1 = Advanced Mode1
2 = Advanced Mode2
Maximum of 36 digits (0 ~ 9, ,
*
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 12 characters
Maximum of 36 digits (0 ~ 9, ,
*
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 12 characters
0~9, * , # Maximum of 8 digit
0 = Common use for both analog
extensions and trunks
1 = Use for analog exten-
sions(DTMF receivers)
2 = Use for analog trunks(DTMF
receivers/ Dial tone Detection/
Caller ID detection)
0 = Not Used (Calls will not be
routed based off a users caller
ID.)
1 = Internal Dial (Calls will be
routed to an internal number
specified in PRG 13-04-04.)
2 = Incoming Ring Group (Calls
will be routed to a ring group
specified in PRG 13-04-04.)
3 = Remote Monitor (Used for
the security feature and not Flex-
ible Caller ID routing.)
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0, * , #, P, R, @
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 50 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor Dial (Up to 8
digits)
0 = Normal System Ring Pattern
1 ~ 4 = Tone Pattern 1 ~ 4
5 ~ 9 = Scale Pattern 1 ~ 5
10 ~ 13 = Tone Pattern 5 ~ 8
SL2100
Default
1
2
No Setting
A
No Setting
No Setting
No Setting
755
Resource 01-140 = 0
0
No Setting
0
1-7