NEC SL2100 Features And Specifications Manual page 723

ISSUE 1.0
Do Not Disturb (DND)
Line Preference
Prime Line Selection
Programmable Function Keys
Single Line Terminals
Toll Restriction
Transfer
InMail
Guide to Feature Programming
Program Program Name
No.
14-01-09 Basic Trunk Data Setup - Private Line
14-07-01 Trunk Access Map Setup - Trunk Port Number
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
15-07-01 Programmable Function Keys
21-02-01 Trunk Group Routing for Extensions - Route Ta-
ble Number
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
22-04-01 Incoming Extension Ring Group Assignment -
Extension Number
Features and Specifications Manual
Input Data
0 = Disable Private Line (Normal)
1 = Enable Private Line (Private
Line)
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming and access when
trunk on Hold
6 = Incoming and outgoing ac-
cess
7 = Full access
001 ~ 128
-
0 ~ 50
0 = No Setting (Calls will not
route.)
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
Maximum eight Digits
SL2100
Default
0
Access Map 1 ~ 128 =
Trunk Ports 1 ~ 128 as-
signed with option 7 ac-
cess (incoming and
outgoing access and
access when trunk is
on Hold).
1
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
1
0
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
1-709
P