Ip Trunk - H.323 - NEC SL2100 Features And Specifications Manual

SL2100
Program
No.
14-06-01 Trunk Group Routing - Trunk Group
20-08-13 Class of Service Options (Outgoing Call Service)
- Set Calling Party Number
20-09-02 Class of Service Options (Incoming Call Service)
I
- Caller ID Display
21-17-01 IP Trunk (SIP) Calling Party Number Setup for
Trunk - Calling Party Number
21-18-01 IP Trunk (H.323) Calling Party Number Setup for
Extension - Calling Party Number
22-02-01 Incoming Call Trunk Setup - Trunk Service Type
44-02-01 Dial Analysis Table for ARS/F-Route Access - Di-
al
44-02-02 Dial Analysis Table for ARS/F-Route Access -
Service Type
44-02-03 Dial Analysis Table for ARS/F-Route Access -
Additional Data
44-05-01 ARS/F-Route Table - Trunk Group Number
44-05-09 ARS/F-Route Table - Maximum Digit
84-01-02 H.323 Trunk Basic Information Setup - Number
of G.711 audio frames
84-01-03 H.323 Trunk Basic Information Setup - G.711
VAD mode
84-01-04 H.323 Trunk Basic Information Setup - G.711
Type
84-01-05 H.323 Trunk Basic Information Setup - Number
of G.729 audio frames
84-01-06 H.323 Trunk Basic Information Setup - G.729
VAD mode
84-01-07 H.323 Trunk Basic Information Setup - G.729 Jit-
ter Buffer( min)
84-01-08 H.323 Trunk Basic Information Setup - G.729 Jit-
ter Buffer (average)
1-532
Program Name Input Data
0 = Not Set
001 ~ 050 = Trunk group No.
101 ~ 150 = 100 + Networking
System No.
1001 ~ 1050 = 1000 + Route Ta-
ble No.
0 = Off (when set to Off the sys-
tem will not send any outbound
calling party information.)
1 = On (when set to ON the sys-
tem will send calling party infor-
mation for the station or trunk.)
0 = Off
1 = On
Up to 16 digits
(1 ~ 0, , #)
*
Up to 16 digits
(1 ~ 0, , #)
*
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
Up to eight digits
(Use line key 1 for a Don't Care
digit, @)
0 = No setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table (F-
Route)
3 = Dial Extension Analyze Table
(Option)
1 = Delete Digit = 0 ~ 255 (255 =
Delete All Digits)
2 = 0 ~ 100 (0 = No Setting)
3 = Dial Extension Analyze Table
Number = 0 ~ 4 (0 = No Setting)
1 ~ 4
0 = Disable
1 = Enable
0 = A-law
1 = μ-law
1 ~ 6
0 = Disable
1 = Enable
0 ~ 300 ms
0 ~ 300 ms
ISSUE 1.0
Default
Refer to the Program-
ming Manual for the
default values.
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
No Setting
No Setting
0
No Setting
0
0
0
0
3
0
0
3
0
30
60

IP Trunk - H.323