System Caller Log; Table 1-62 Station Application - NEC SL2100 Features And Specifications Manual

SL2100
Description
With this feature, the user can check all caller logs one by one when they push the system caller log
function key. User can check 200 caller logs in the System. All outside calls whether answered or not
are stored in the System Call log.
Conditions
S
• The system caller log key is appearance function code. Set Program 20-07-10 to '1' in order to set
key via service code.
• The latest log is shown first. The system call log is registered when a call ends. (The call log list is
not the order of incoming call time.)
• The oldest log can be checked when the user presses the up soft-key or Volume UP Key.
• Only trunk Calls are displayed.(Program 15-02-34 settings are not used.)
• The Cursor key on IP7WW-12/24TXH-[ ]1/IP7[ ]-8IPLD-C1/DT800/DT400 terminals can be used to
control the scroll feature.
• One record in 'SYSTEM CALL HISTORY' function is registered relating to one external incoming
call.
• If a notified calling number agrees in search of Common ABB (Program 13-04) area, the name of
ABB is registered into the 'SYSTEM CALL HISTORY' record. Telephone Book is not applied.
• Internal Caller Logs are not displayed in this feature.
• Search and jump function are not supported.
• The Caller Logs are erased when system is reset.
• Only a user can operate the system caller log key.
• The system caller log is not supported on the DSS console function key.
• The called extension number is not displayed.
• If Program 20-02-18 times out, the LCD display changes to IDLE automatically.
• Missed calls are noted by an asterisk.
Default Settings
Enabled
System Availability
Terminals
All Station and Trunk Terminals
Required Component(s)
IP7[ ]-CPU-C1
Terminal Type
IP7WW-12/24TXH-B1
1-810

Table 1-62 Station Application

Applied/Not Applied
Y

System Caller Log

Remarks
System Caller Log
ISSUE 1.0