NEC SL2100 Features And Specifications Manual page 424

SL2100
Program
No.
41-19-05 ACD Voice Mail Delay Announcement - 2nd De-
lay Message Sending Count
41-19-06 ACD Voice Mail Delay Announcement - Wait
Tone Type at Message Interval
41-19-07 ACD Voice Mail Delay Announcement - ACD
Forced Disconnect Time after 2nd Announce-
ment
41-19-08 ACD Voice Mail Delay Announcement - Delay
Message Interval Time
47-03-02 InMail Group Mailbox Options - Mailbox Number
I
47-03-03 InMail Group Mailbox Options - Mailbox Type
47-03-03 InMail Group Mailbox Options - Routing Mailbox
Number
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
11-12-08 Service Code Setup (for Service Access) -
Barge-In
14-02-10 Analog Trunk Data Setup - Caller ID
15-02-28 Multiline Telephone Basic Data Setup - Message
Waiting Lamp Color
15-03-09 Single Line Telephone Basic Data Setup - Caller
ID Function
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
20-11-01 Class of Service Options (Hold/Transfer Service)
- Call Forward All
20-11-02 Class of Service Options (Hold/Transfer Service)
- Call Forward When Busy
20-11-03 Class of Service Options (Hold/Transfer Service)
- Call Forwarding When Unanswered
20-11-04 Class of Service Options (Hold/Transfer Service)
- Call Forwarding (Both Ringing)
20-11-05 Class of Service Options (Hold/Transfer Service)
- Call Forwarding with Follow Me
20-11-12 Class of Service Options (Hold/Transfer Service)
- Call Forwarding Off Premise (External Call For-
warding)
20-13-01 Class of Service Options (Supplementary Serv-
ice) - Long Conversation Alarm
1-410
Program Name Input Data
1 ~ 255
0 = No message is played.
0 = Ring Back Tone
1 = Music On Hold Tone
2 = Background Music Source
0 ~ 64800 (seconds)
0 ~ 64800 (seconds)
Up to eight digits
No Setting (entered by pressing
Hold)
0 = None
1 = Subscriber
2 = Routing
01 ~ 32
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
0~9, * , # Maximum of 8 digit
0 = Off (Caller ID not displayed.)
1 = On ( Caller ID is displayed.)
0 = Green
1 = Red
0 = Disable (Caller ID not dis-
played.)
1 = Enable (Caller ID is dis-
played.)
1 ~ 15
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
ISSUE 1.0
Default
0
0
0
20
No Setting
1
0
Resource 1 ~ 140 = 0
710
1
0
0
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
InMail