NEC SL2100 Features And Specifications Manual page 99

ISSUE 1.0
Program Program Name
No.
26-03-01 ARS Dial Treatments - Treatment Code
20-03-04 System Options for Single Line Telephones - Di-
al Sending Start Time for SLT or ARS
ARS COS
Program Program Name
No.
11-09-01 Trunk Access Code - Trunk Access Code
14-05-01 * Trunk Group - Trunk Group Setup
26-04-01 * ARS Class of Service - Class
26-01-01 * Automatic Route Selection (ARS/F-Route) Serv-
ice - ARS Service
26-01-06 * Automatic Route Selection (ARS/F-Route) Serv-
ice - Class of Service Match Access
26-01-07 Automatic Route Selection (ARS/F-Route) Serv-
ice - F-Route Access COS Reference
26-02-01 * Dial Analysis Table for ARS/LCR -
Dial
26-02-02 * Dial Analysis Table for ARS/LCR -
ARS Service Type
26-02-03 * Dial Analysis Table for ARS/LCR -
Additional Data/Service Number
26-02-04 * Dial Analysis Table for ARS/LCR -
ARS Class of Service
26-02-05 Dial Analysis Table for ARS/LCR -
26-03-01 ARS Dial Treatments - Treatment Code
44-05-01 * ARS/F-Route Table - Trunk Group Number
Features and Specifications Manual
Input Data
Maximum 36 characters
0 ~ 64800 seconds
Input Data
Dial (Up to four digits)
Trunk Port 1 ~ 128
Trunk Group No. 0 ~ 50
Priority 1 ~ 128
0 ~ 16
0 = No Class
0 = Disabled (ARS service is
OFF.)
1 = Enabled (ARS service is
ON.)
0 = Disabled (ARS service is
OFF.)
1 = Enabled (ARS service is
ON.)
0 = F-Route
1 = ARS
Maximum of 16 digits (0 ~ 9, ,
*
#, @)
0 = No Service (Call Restricted)
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02) : Se-
lect Trunk Group Number
0 ~ 50 (Trunk Group Number 0 =
No Route)
101 ~ 150
If Service Type 2 (in 26-02) :
F-Route Time Schedule Not
Used = 0 ~ 100
(F-Route Table Number).
Refer to Programming Manual..
F-Route Time Schedule Used =
0 ~ 100
(F-Route Selection Number).
Refer to Programming Manual..
0 ~ 16
0 = No ARS Class (Call Restric-
ted)
0 = No Dial Treatment Table
Added (Call will be sent out of
the system as dialed.)
1 ~ 15 = ARS Treatment tables 1
~ 15
Maximum 36 characters
0 = Trunk Group 0 (Call Restric-
ted)
1 ~ 50 = Trunk Group 1 ~ 50
SL2100
Default
No Setting
1
Default
0
Refer to the Program-
ming Manual for the
default values.
0
0
0
0
No Setting
0
0
0
0
No Setting
0
1-85
A