NEC SL2100 Features And Specifications Manual page 33

ISSUE 1.0
Operation
To enter an Account Code anytime while on a trunk call:
The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your
system has Optional Account Codes enabled. You may also be able to use this procedure for
incoming calls. This procedure is not available for Single Line Terminals.
1. Dial .
*
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
2. Dial your Account Code (1~16 digits, using 0~9 and #).
If Account Codes are hidden, each digit you dial shows an "
3. Dial .
*
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
To enter a Forced Account Code before dialing the outside number:
If your system has Forced or Verified Account Codes, you may use this procedure instead of letting
the system prompt you for your Account Code. You may also use this procedure if your system has
Optional Account Codes.
If your system has Verified Account Codes enabled, be sure to choose a code programmed into your
Verified Account Code list.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code. Refer to
Placing on page 1-174
2. Dial .
*
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
3. Dial your Account Code [1~16 digits, using 0~9 and # or (3~16 digits for Forced)].
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes
are hidden, each digit you dial shows an
4. Dial .
*
- OR -
Press your Account Code key (PRG 15-07-01 or SC 751: code 50).
5. Dial the number you want to call.
To dial an outside number and let your system tell you when a Forced Account Code
is required:
1. Access a trunk and dial the number you want to call.
2. Wait for your call to go through.
- OR -
Features and Specifications Manual
for more information.
* on the telephone display (depending on programming).
" character on the telephone display.
*
Central Office Calls,
SL2100
A
1-19