NEC SL2100 Features And Specifications Manual page 635

ISSUE 1.0
System Availability
Terminals
Any Multiline Terminal
Required Component(s)
SL2100 MOBILE EXT-01 LIC
Related Features
Abbreviated Dialing/Speed Dial
Caller ID
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Station Message Detail Recording
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program Program Name
No.
11-02-01 * Extension Numbering - Extension Number
11-13 Service Code Setup (for ACD)
14-01-24 Trunk-to-Trunk Outgoing Caller ID through Mode 0 = Disable (No)
15-22-01 * Mobile Extension Setup - Mobile Extension Tar-
get Setup
15-22-02 Mobile Extension Setup - Connect Confirmation
Features and Specifications Manual
Input Data
Dial (Up to 8 digits)
-
1 = Enable (Yes)
0 = No Setting
1 ~ 999 = Speed Dial Bin 1 ~ 999
(PRG 13-04)
0 = Always (User must dial
*
when answered for the call to cut
through on ALL line types.)
1 = On Analog Line (User must
dial when answered for the call
*
to cut through on Analog lines
only.)
2 = Never (When the call is an-
swered the call is immediately
cuts through.)
SL2100
M
Default
Extension Port Num-
ber : Extension Number
001 ~ 064 : 101 ~ 164
065 ~ 128 : No Setting
Refer to Programming
Manual.
0
0
0
1-621