NEC SL2100 Features And Specifications Manual page 760

SL2100
Program
No.
15-18-02 Virtual Extension Key Enhanced Options - Dis-
play mode when placing a call on Virtual Exten-
sion Key
20-04-03 System Options for Virtual Extensions - Call
Coverage Delay Interval
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-07-10 Class of Service Options (Administrator Level) -
Programmable Function Key Programming (Ap-
pearance Level)
20-10-08 Class of Service Options (Answer Service) - Vir-
S
tual Extension Off-Hook Answer
20-13-27 Class of Service Options (Supplementary Serv-
ice) - Busy on Seizing Virtual Extension
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
23-04-01 Ringing Line Preference for Virtual Extensions -
Extension Group Number
Operation
To answer a call ringing a SIE key:
1. Press the flashing SIE key.
To program a SIE key on a phone:
1. Press Speaker key.
2. Dial 752.
3. Press the key you want to program.
4. Dial 03.
*
5. Dial the number of the extension you want to appear on the key.
6. Press Hold key once for Immediate Ring, (or skip to step 8 for Delayed Ring).
7. Dial the mode number in which the key rings.
8. Press Hold key again for Delayed Ring, (or skip to step 10).
9. Dial the mode number in which the key delays ringing.
10. Press Speaker key.
1-746
Program Name Input Data
0 = Secondary Extension Name
1 = Actual Station Name
0 ~ 64800 seconds
1 ~ 15
0 = Off
1 = On
0 = Off (Ringing Line Preference
Disabled)
1 = On (Ringing Line Preference
Enabled)
0 = Off
1 = On
0 = Disable (Off)
1 = Enable (On)
0 ~ 50
(0 = No Setting)
Secondary Incoming Extension
ISSUE 1.0
Default
0
10
Extension 101 is Class
15 and other Extension
are Class 1
COS 1 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
1
0