NEC SL2100 Features And Specifications Manual page 643

ISSUE 1.0
Program Program Name
No.
13-04-03 Speed Dialing Number and Name - Transfer
Mode
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
14-01-24 Trunk-to-Trunk Outgoing Caller ID through Mode 0 = Disable (No)
14-01-30 Basic Trunk Data Setup - Flexible Ringing by
Caller ID
15-22-01 Mobile Extension Setup - Mobile Extension Tar-
get Setup
15-22-03 Mobile Extension Setup - Trunk Access Code
15-22-04 Mobile Extension Setup - Call Back
20-01-16 System Options - Mobile Extension Callback
time
20-01-20 System Options - ProgressTone for Mobile Ex-
tension Setting
20-31-24 Timer Class Timer Assignment - Mobile Exten-
sion answer time
20-31-25 Timer Class Timer Assignment - Mobile Exten-
sion callback time
22-01-12 System Options for Incoming Calls - Mobile Ex-
tension answer time
80-01-01 Service Tone Setup - Tone 54, Progress Tone
Features and Specifications Manual
Input Data
0 = Not Used (Calls will not be
routed based off a users caller
ID.)
1 = Internal Dial (Calls will be
routed to an internal number
specified in PRG 13-04-04.)
2 = Incoming Ring Group (Calls
will be routed to a ring group
specified in PRG 13-04-04.)
3 = Remote Monitor (Used for
the security feature and not Flex-
ible Caller ID routing.)
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0, , #, P, R, @
*
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 8 digits)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = No Setting
1 ~ 999 = Speed Dial Bin 1 ~ 999
(PRG 13-04)
0 = Normal Trunk Access (PRG
11-09-01)
1 = Individual Trunk Access
(PRG 11-09-02)
0 = Disable
1 = Enable
1 ~ 64800 seconds
0 = Disable
1 = Enable
1 ~ 64800 seconds
1 ~ 64800 seconds
0~ 64800 seconds
SL2100
Default
0
No Setting
M
0
1
0
0
0
15
1
3
15
3
Refer to the Program-
ming Manual for the
default values.
1-629