NEC SL2100 Features And Specifications Manual page 743

ISSUE 1.0
Night Service
Programmable Function Keys
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Analog Trunk Ring Group
Program Program Name
No.
22-04-01 * Incoming Extension Ring Group Assignment -
Extension Number
22-05-01 * Incoming Trunk Ring Group Assignment - In-
coming Group Number
22-02-01 * Incoming Call Trunk Setup - Trunk Service Type
11-15-09 Service Code Setup, Administrative (for Special
Access) - Transfer to Incoming Ring Group
22-01-04 System Options for Incoming Calls - DIL No An-
swer Recall Time
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number
20-13-49 Class of Service Options (Supplementary Serv-
ice) - BLF Indication on CO Incoming State
DID calls to a Ring Group
Program Program Name
No.
22-04-01 * Incoming Extension Ring Group Assignment -
Extension Number
Features and Specifications Manual
Input Data
Maximum eight Digits
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0~9, , # Maximum of 8 digit
*
0 ~ 64800 seconds
0 = No Overflow
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
0 = Off (Disabled)
1 = On (Enabled)
Input Data
Maximum eight Digits
SL2100
R
Default
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
1
0
No Setting
0
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
COS 01 ~ 15 = 0
Default
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
1-729