NEC SL2100 Features And Specifications Manual page 408

SL2100
Do Not Disturb (DND)
Handsfree Answerback/Forced Intercom Ringing
Off-Hook Signaling
Programmable Function Keys
Ringdown Extension, Internal/External
Guide to Feature Programming
H
Program
No.
15-07-01 Programmable Function Keys
15-02-22 Multiline Telephone Basic Data Setup - Multiple
Incoming From Intercom and Trunk
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-09 Class of Service Options (Outgoing Call Service)
- Hotline/Extension Ringdown
20-08-19 Class of Service Options (Outgoing Call Service)
- Hotline for SPK
20-11-06 Class of Service Options (Hold/Transfer Service)
- Unscreened Transfer (Ring Inward Transfer)
20-11-11 Class of Service Options (Hold/Transfer Service)
- Automatic On-Hook Transfer
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
21-01-09 System Options for Outgoing Calls - Ringdown
Extension Timer (Hotline Start)
21-11-01 Dial Block Restriction Class Per Extension - Hot-
line Destination Number
22-01-01 System Options for Incoming Calls - Incoming
Call Priority
30-05-02 DSS Console Lamp Table - Busy Extension
30-05-03 DSS Console Lamp Table - DND Extension
30-05-04 DSS Console Lamp Table - ACD Agent Busy
30-05-05 DSS Console Lamp Table - Out of Schedule
(ACD DSS)
30-05-06 DSS Console Lamp Table - ACD Agent log Out
(ACD DSS)
30-05-07 DSS Console Lamp Table - ACD Agent Log In
(ACD DSS)
30-05-09 DSS Console Lamp Table - Hotel Status Code 1
(Hotel DSS)
30-05-10 DSS Console Lamp Table - Hotel Status Code 2
(Hotel DSS)
1-394
Program Name Input Data
-
0 = Disable
1 = Enable
1 ~ 15
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off (manually)
1 = On (automatically)
0 ~ 64800 seconds
1 ~ 0, , #, Pause, Hook Flash,
*
@ (Code to wait for answer su-
pervision) (maximum 36 digits)
0 = Intercom Call Priority
1 = Trunk Call Priority
0 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
1 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
0 ~ 7 (Lamp Pattern Data)
ISSUE 1.0
Default
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
0
No Setting
1
7
3
7
0
5
4
7
1
Hotline