NEC SL2100 Features And Specifications Manual page 279

ISSUE 1.0
Related Features
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Answering
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Long Conversation Cutoff
Tandem Trunking (Unsupervised Conference)
Transfer
Voice Response System (VRS)
Guide to Feature Programming
Program Program Name
No.
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
11-09-02 Trunk Access Code - 2nd Trunk Route Access
Code
14-01-02 Basic Trunk Data Setup - Transmit Level
14-01-03 Basic Trunk Data Setup - Receive Level
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
20-01-05 System Options - DTMF Receive Active Time
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
20-13-23 Class of Service Options (Supplementary Serv-
ice) - Display the Reason for Transfer
20-14-01 Class of Service Options for DISA/E&M - First
Digit Absorption (Delete First Digit Dialed)
20-14-02 Class of Service Options for DISA/E&M - Trunk
Group Routing/ARS Access
20-14-03 Class of Service Options for DISA/E&M - Trunk
Group Access
20-14-04 Class of Service Options for DISA/E&M - Outgo-
ing System Speed Dial
Features and Specifications Manual
Input Data
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
Dial (Up to four digits)
1 ~ 63
(- 15.5 dB ~ + 15.5 dB in 0.5 dB
intervals)
1 ~ 63
(- 15.5 dB ~ + 15.5 dB in 0.5 dB
intervals)
0 = Disable (No)
1 = Enable (Yes)
0 ~ 64800 seconds
1 ~ 15
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
SL2100
Default
Resource 01 ~ 140 = 0
No Setting
32 (0 dB)
32 (0 dB)
1
10
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
1-265
D