NEC SL2100 Features And Specifications Manual page 70

SL2100
6. Press Speaker key of hang up the Handset to end the page.
To make a Combined Page:
1. At a Multiline Terminal, press Speaker key or Lift the Handset.
- OR -
At a Single Line telephone, lift the handset.
2. Dial 1 (PRG 11-12-24).
*
3. Dial # and the system ID (the system ID must be dialed as two digits (e.g. #01)).
4. Dial the External Zone number (0 ~ 3). Dial 0 calls All Call External Paging.
5. Make the paging announcement.
6. Press Speaker key of hang up the Handset to end the page.
A
Network Call Park
Park places a call (ICM or Trunk) in a waiting state, called Park Orbit, so that an extension user may
pick it up. Any extension user in the network who is in the same Park Group as the extension which
placed the call in park can answer the call. If you do not want the park hold orbits to be available to
other users within the network, then place the extensions at each site in a different park hold group in
PRG 24-03.
Operation
To Park a call in a system orbit:
1. At a Multiline Terminal press the Park key (PRG 15-07 or SC 752:
The Park Key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce the call.
3. Press Speaker key or hang up the handset.
If not picked up the call will recall to you.
- OR -
1. At a Multiline Terminal, press Transfer key or Hold Key.
- OR -
At a Single Line telephone, hook flash.
2. Dial #6 (PRG 11-12-31) and the Park orbit (01 ~ 50).
If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce the call.
4. Press Speaker key or hang up the handset.
If not picked up the call will recall to you.
To pick up a parked call:
1. At a Multiline Terminal press the Park key (PRG 15-07 or SC 752:
- OR -
1. Press Speaker Key or Lift the handset.
2. Dial 6 (PRG 11-12-32) and the Park orbit (01 ~ 50).
*
1-56
ISSUE 1.0
04 + orbit).
*
04 + orbit).
*
AspireNet