NEC SL2100 Features And Specifications Manual page 560

SL2100
Programming Flowchart of ISDN-PRI - Placing Calls
I
In PRG 20-08-02,
enter 0 to disable
outgoing calls.
In PRG 20-06-01, assign
Class of Service to extensions.
In PRG 20-08-01, ebter
0 to disable calling
number display by Telco.
In PRG 20-13-31,
enter 0 to disable trunk
ID display by Telco.
1-546
In PRG 10-03-01, determine the mode of the
IP7WW-1PRIDB-C1 (0=not set, 1=T-Bus)
In PRG 10-03-03,
No
ebter '0'.
In PRG 10-03-04, select the Layer 3 timer type (1-5). The timer
value is set up in PRG 81-06 (T-Bus)
In PRG 10-03-06, determine the length of cable used to connect from
the CSU to the IP7WW-1PRIDB-C1
(0=0-40m, 1=40-81m, 2=81-122m, 3=122-162m, 4=162-200m)
In PRG 10-03-08,
Enblock
enter '0'.
Should system users be able to place
No
outgoing calls on trunks?
Stop
Should Telco display the
No calling number for outgoing
Should Telco display the
trunk identification for
No
outgoing calls the extension
Start
Is the CRC
In PRG 10-03-03,
Multi-Frame
Yes
(CRC4)
used?
Is the Dial
Sending Mode
In PRG 10-03-08,
Enblock or Overlap
Overlap
Sending?
In PRG 10-03-09, select
either Keypad Facility (0) or
Called Party Number (1) for
the dial information element.
Yes
Yes
calls?
Yes
places?
Go To
A
ISSUE 1.0
ebter '1'.
enter '1'.
PRG 20-08-02,
enter '1' to enable
outgoing calls.
In PRG 20-08-13, enter
1 to enable calling
number display by Telco.
In PRG 20-13-31,
enter 1 to enable trunk
ID display by Telco.
ISDN Compatibility