NEC SL2100 Features And Specifications Manual page 245

ISSUE 1.0
Related Features
Call Forwarding
Department Step Calling
Transfer
InMail
Voice Response System (VRS)
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program Program Name
No.
11-07-01 * Department Group Pilot Numbers - Extension
Group Pilot Number
16-01-01 Department Group Basic Data Setup - Depart-
ment Name
16-01-02 Department Group Basic Data Setup - Depart-
ment Calling Cycle
16-01-03 Department Group Basic Data Setup - Depart-
ment Routing when Busy (Auto Step Call)
16-01-04 Department Group Basic Data Setup - Hunting
Mode
16-01-05 Department Group Basic Data Setup - Extension
Group All Ring Mode Operation
16-01-06 Department Group Basic Data Setup - STG With-
draw Mode
16-01-07 Department Group Basic Data Setup - Call Recall
Restriction for STG
16-01-08 Department Group Basic Data Setup - Maximum
Queuing number for Department Group Call
16-01-09 Department Group Basic Data Setup - Depart-
ment Hunting No Answer Time
16-01-10 Department Group Basic Data Setup - Enhanced
Hunt Type
Features and Specifications Manual
Input Data
Dial (Up to 8 digits)
Maximum 12 characters
0 = Normal Routing (Priority)
1 = Easy - UCD Routing (Circu-
lar)
0 = Normal (Intercom caller
hears busy tone.)
1 = Circular (Intercom caller
routes to an idle group member.)
0 = Stop at last member (non-
loop)
1 = Circular
0 = Manual (Ring the extensions
one at a time when the service
code are pressed.)
1 = Automatic (Ring all exten-
sions.)
0 = Disabled (Call will camp on
to the group.)
1 = Automatic (Call follows PRG
22-11-11.)
0 = Disabled (Call will recall.)
1 = Enabled (Call will not recall.)
0 ~ 32
0 = No Queuing
0 ~ 64800 seconds
0 = No hunting
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No
Answer
SL2100
D
Default
Group Number 1 ~ 49
= No Setting
Group Number 50 =
3999
No Setting
0
0
0
0
0
0
0
15
0
1-231